Panasonic KX-TA616 - External Music Connection

Installation 2-11
2.10 External Music Connection
One music source, such as a radio (user-supplied), can be connected to the system as
illustrated below.
Insert the plug to the earphone/headphone jack on the external music source.
Use an EIAJ RC-6701 A plug (2-conductor, ø 3.5mm in diameter).
• Input impedance: 8 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m {33 feet}
POWER
External Music Jack
External Music source
EXT.
MUSIC
• System programming for the music sources used for Music on Hold and Background
Music (BGM) is required.
• To adjust the sound level of the Music on Hold, use the volume control on the external
music source.
• Required System Programming
Section 4.2, System Programming
[111] Hold Music Selection
• Feature Reference
Section 3, Features
Music on Hold / Background Music (BGM)
☞
!
!
*
The illustration on this page is a KX-TA308.