Panasonic KX-TA616 - Break Ratio

System Programming 4-25
4.2 System Programming [123]-[125]
Selects the pulse break rate, MODE1 or MODE 2, when a Pulse is sent to the Central Office
during a conversation.
MODE 1: 66 %
MODE 2: 60 %
Default MODE 1
1
[123] Break Ratio
2
3
SELECT
STORE
END
NEXT
(MODE1/
MODE2)
[124] SLT Ringing Mode Selection
Selects the length of the ring cycle for a single line telephone (SLT).
MODE 1: 5 second cycle
MODE 2: 3 second cycle
Default MODE 1
1
2
4
SELECT
STORE
END
NEXT
(MODE1/
MODE2)
[125] Toll Restriction Check for and #
Assigns whether the entered “ ” and “#” are checked by toll restriction or not. This
assignment is required for certain Central Offices to prevent toll fraud. Some Central
Offices ignore the user-dialed “ ” and “#”. If your Central Office ignores these symbols,
select “Disable”.
.
Default Enable
• Feature Reference
Section 3, Features
Toll Restriction
1
2
5
SELECT
STORE
END
NEXT
(Enable/
Disable)
☞