4-72 System Programming
[605] 4.2 System Programming
Selects the account code input mode, Option, Forced, Verify–All or Verify–Toll, for each
extension jack. This feature displays the account code of the called or calling party on the
SMDR.
Option: The user can enter any account code, if needed.
Forced: The user must always enter an account code. The code can be any number.
Verify–All: The user must always enter an assigned account code in program
[310] “Account Codes” to make an outside call.
Verify–Toll: The user can enter an assigned account code in program [310] to override
toll restriction. The toll restriction COS numbers 3 through 5 will be
changed temporarily to the COS number 2. (The COS numbers 1 and 2 will
not be changed.)
* Extension jack number: 01 through 24 / (All extension jacks)
Default All extension jacks – Option
• Feature References
Section 3, Features
Account Code Entry, Toll Restriction Override by Account Codes
To Next Page
Loading...
