Panasonic KX-TA616 - UCD Ringing Time before Intercept

System Programming 4-69
4.2 System Programming [525]-[526]
Assigns the length of time for the Intercept Routing – No Answer feature (☞ [524] “UCD
Intercept Mode”, Intercept). When the time expires, the system starts to redirect the call to
the programmed extension(s).
Default 20 seconds
• Feature References
Section 3, Features
Intercept Routing, Uniform Call Distribution (UCD)
[525] UCD Ringing Time before Intercept*
1
2
5
NEXT
5
STORE
END
SELECT
(10/20/30/
40/60/120 sec)
Assigns the length of time to call the extension(s) where a call is redirected by the Intercept
Routing – No Answer feature (☞ [524] “UCD Intercept Mode”, Intercept) after the time
programmed in [525] “UCD Ringing Time before Intercept” expires.
Default 20 seconds
• Feature References
Section 3, Features
Intercept Routing, Uniform Call Distribution (UCD)
[526] UCD Ringing Time after Intercept*
1
2
5
NEXT
6
STORE
END
SELECT
(10/20/30/
40/60/120 sec)
☞
☞
*
1
: Required only when the optional OGM/FAX Detection
Card is installed.