Panasonic KX-TA616 - [999] System Data Clear

4-88 System Programming
[999] 4.2 System Programming
Resets all or a specific area of the current assigned data to the default settings. The areas are
as follows.
All Para : Resets all data to the default settings.
System Para: Resets all data to the default settings except for the data of the following 4
parameters.
CO Para: Resets programs [400] through [403] and [405] through [424] to the
default settings on an outside (CO) line basis.
Ext Para: Resets programs [102], [516] and [600] through [615] to the default
settings on an extension basis.
DSS Para: Resets the assigned data on the DSS buttons and PF buttons on the DSS
console.
Speed Dial : Resets the System Speed Dialing numbers (00 through 99) assigned in
program [001].
*
1
Outside (CO) line number: 1 through 6 / (All outside lines)
*
2
Extension jack number: 01 through 24 / (All extension jacks)
*
3
DSS console number: 1 through 2 / (Both DSS console numbers)
• This program and [804] “System Data Dump” are not included.
• Feature Reference
Section 3, Features
System Data Default Set
[999] System Data Clear
9
9
9
NEXT
STORE
SELECT
(All/System/CO/Ext/
DSS Para/Speed Dial)
< To select All, System parameter and/or Speed Dial. >
END
9
9
9
NEXT
STORE
SELECT
< To select the CO (outside line) parameter. >
END
outside line no.*
1
(1 ··· 6/ )
To continue
STORE
9
9
9
NEXT
STORE
SELECT
< To select the DSS parameter. >
END
STORE
(1···2/ )
(All/System/CO/Ext/
DSS Para/Speed Dial)
(All/System/CO/Ext/
DSS Para/Speed Dial)
To continue
To continue
!
!
9
9
9
NEXT
STORE
SELECT
< To select the Extension parameter. >
END
STORE
(01 ··· 24/ )
(All/System/CO/Ext/
DSS Para/Speed Dial)
To continue
extension jack no.*
2
DSS console no.*
3
☞