4-56 System Programming
[500] 4.2 System Programming
Selects the destination of an incoming outside call via the DISA feature when you select
“DISA 1” or “DISA 2” in programs [414]-[416] “Outside (CO) Line Mode
–Day/Night/Lunch”, Without AA (auto attendant) or With AA . If you select “With AA”,
assign the next program [501] “DISA Built-in Auto Attendant”.
Without AA: Available destinations are: extension numbers assigned in program
[009] “Extension Number Assignment”, line access numbers (9 or 0, 81
through 86) and the operator number (0 or 9).
With AA: Available destinations are: numbers available in the “Without AA” mode,
and numbers (0 through 9) assigned in program [501].
Default Without AA
• For example: in the “With AA” mode, if a number is not dialed within the programmed
time in [517] “DISA AA Wait Time” after dialing 1, the call is received at the DISA
built-in auto attendant number 1.
• In the
“
With AA
” mode,
if 0 and/or 9 are not assigned in program [501], the system
recognizes them as a line access number and/or operator number.
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
To Next Page
Loading...
