2-10 Installation
2.9 External Pager (Paging Equipment) Connection
One external pager (user-supplied) can be connected to the system as illustrated below.
Use an EIAJ RC-6701 A plug (2-conductor, ø 3.5 mm in diameter).
• Output impedance: 600 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m {33 feet}
• To adjust the sound level of the pager, use the volume control on the amplifier.
• Required System Programming
Section 4.2, System Programming
[106] External Paging Access Tone
• Feature Reference
Section 3, Features
Paging
☞
!
!
*
The illustration on this page is a KX-TA308.
To Next Page
Loading...
