Panasonic KX-TA616 - DISA Built-In Auto Attendant

System Programming 4-57
4.2 System Programming [501]
Assigns a maximum of 10 DISA built-in auto attendant numbers when “With AA” is
selected in program [500] “DISA Incoming Dialing Mode Selection”. The extension
numbers assigned in program [009] “Extension Number Assignment”, and the extension
group numbers assigned in program [600] “Extension Group Assignment” can be assigned as
a 1 digit number and used as DISA built-in auto attendant numbers.
Default All auto attendant numbers – Not stored
• If you would like to use a line access number and/or operator number in the “With AA”
mode, do not assign auto attendant number(s) which correspond to
a line access number and/or
operator number (0 and/or 9).
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
extension
jack no.
1
0
5
[501] DISA Built-in Auto Attendant
NEXT
SELECT
END
(Jack/GRP/
Not Stored)
AA no.
(0 ··· 9)
To continue
NEXT
PREV
or
(1···8)
extension
group no.
or
!
!
(01···24)
STORE
☞