Panasonic KX-TA616 - [310] Account Codes

SELECT
4-36 System Programming
[310]-[311] 4.2 System Programming
Assigns up to 40 automatic pause insertion codes which are checked with the outside
outgoing call number. When one of the codes is the same as the call number, the pause time
assigned in program [417] “Pause Time” is automatically inserted after the code. If a second
dial tone is sent from your Central Office, it is convenient to assign the area code as the
pause code.
Default All codes – Not stored.
• To correct a wrong entry, press the CLEAR button and enter the new one.
1
1
3
[311] Automatic Pause Insertion Codes
NEXT
END
(01 ··· 40)
pause code
7 digits max.
(0
··· 9, , #)
code no.
NEXT
PREV
or
Assigns up to 24 account codes which are compared with the code entered when
“Verify-All” or “Verify-Toll” is selected in program [605] “Account Code Entry Mode”.
If “Verify-All” is selected, an account code is required to make an outside call.
If “Verify-Toll” is selected, an account code is only required to override toll restriction.
Default All codes – Not stored.
• To correct a wrong entry, press the CLEAR button and enter the new one.
• Feature References
Section 3, Features
Account Code Entry, Toll Restriction Override by Account Codes
0
1
3
[310] Account Codes
NEXT
END
(01 ··· 24)
account code
4 digits
(0
··· 9)
code no.
NEXT
PREV
or
☞
!
!
!
!
To continue
To continue
STORE
STORE
To continue
To continue
SELECT