Panasonic KX-TA616 - Doorphone Ringing; Tone Pattern Selection

System Programming 4-81
4.2 System Programming [706]-[707]
Selects the doorphone ringing pattern, Single, Double, Triple or S-Double.
Single:
Double:
Triple:
S-Double:
* Doorphone number: 1 through 4 / (All doorphones)
Default All doorphones – Triple
• When a doorphone call is received at a proprietary telephone, a tone is heard instead of
ringing.
• Feature References
Section 3, Features
Doorphone Call, Ringing Pattern Selection
[706] Doorphone Ringing / Tone Pattern Selection
7
0
6
SELECT
STORE
END
NEXT
1 s
!
!
[707] Doorphone Access Tone Selection
Enables or disables sending a doorphone access tone to a monitored doorphone. If enabled,
the access tone is heard from the doorphone when monitoring from a telephone starts.
* Doorphone number: 1 through 4 / (All doorphones)
Default All doorphones – Enable
• Feature References
Section 3, Features
Doorphone Call, Room Monitor
7
0
7
NEXT
SELECT
STORE
END
(Enable/
Disable)
(Single/Double/
Triple/S-Double)
☞
☞
To continue
NEXT
PREV
or
doorphone no.*
(1 ··· 4/ )
doorphone no.*
(1 ··· 4/ )
To continue
NEXT
PREV
or