Features 3-63
3 Features
T
Allows an extension user to override toll restriction temporarily to make a toll call from a
toll-restricted extension. The user can carry out this feature by entering one of the account
codes programmed in [310] before dialing the telephone number. The user can make a toll
call with the COS number 2.
• The account code “Verify–Toll” mode at an extension permits users to override their toll
restrictions.
• This feature can be used on extensions assigned to toll restriction COS numbers 3 through
5. The COS numbers 1 and 2 will not be changed.
• If the user does not enter an account code or enters an invalid one, a regular toll restriction
check is done.
• When a user makes a call using this feature, it will appear on the SMDR printout with
either the entered 4-digit account code or the 2-digit index of the entered account code.
This selection is set in program [805].
• Users can also override toll restriction of another extension by using the Walking COS
feature.
Toll Restriction Override by Account Codes
!
!
What is the account code mode?
The Toll Restriction COS
number remains the same as
the extension being used.
Is the COS number 1?
The call is not allowed.
A r eorder tone is
returned to the user.
Does the entered code match
a stored account code?
Option/Forced
No
Yes No
Verify–All
Verify–Toll
TRS Override by Account Codes is attempted.
Does the entered code match
a stored account code?
Yes
The call is made with the
COS number 2.
No
Yes
Flow chart of TRS Override
• Required System Programming
[310] Account Codes
[605] Account Code Entry Mode
[805] SMDR Account Code Selection
• Related Feature References
Account Code Entry, Station Message Detail Recording (SMDR),
Toll Restriction, Walking COS
☞
To Next Page
Loading...
