Panasonic KX-TA616 - DISA Tone Selection after the Security Code

4-66 System Programming
[518]-[519] 4.2 System Programming
Enables or disables sending a beep after entering the security code. If “Enable” is selected, a
beep is sent when the number entered is the same as one of the security codes assigned in
program [512] “DISA Security Codes”.
Default Enable
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
[518] DISA Tone Selection after the Security Code
1
5
NEXT
8
STORE
END
SELECT
(Enable/
Disable)
☞
Assigns the length of time from answering a call with the DISA feature and sending the
DISA outgoing message or a beep. During the assigned length of time, the system will not
receive DTMF signals.
Default 0 second
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
[519] DISA OGM Mute Time
1
5
NEXT
9
STORE
END
SELECT
(0/2/4/6 sec)
☞