EasyManua.ls Logo

Panasonic KX-TA616 - Automatic Route Selection (ARS)

Panasonic KX-TA616
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-4 Features
A
3 Features
Automatic Route Selection (ARS)
The system automatically selects the least expensive route available at the time a long
distance call is made on the outside (CO) line which has enabled the ARS feature. It is not
necessary to dial the access code of the least expensive carrier.
1. Normal Use
To make a call via the least expensive carrier, the dialed number is modified. The following
are modification examples.
Example 1 (Long distance call using Route 1):
[350] “ARS Selection”: Enable
[351] “Route 1 Selection Codes (Leading Digit)”: 9, 0
[355] “Route 1 Exception Codes”: 07
[360] “ARS Modification – Removed Digits”: 0 (No deletion)
[361] “ARS Modification – Added Number”: 050 (Code of least expensive carrier for a
long distance call)
<Dialed number> <Modified number>
93 425 9477 050 93 425 9477
04 123 4567 050 04 123 4567
Example 2 (International call using Route 2):
[350] “ARS Selection”: Enable
[352] “Route 2 Selection Codes (Leading Digit)”: 07
[360] “ARS Modification – Removed Digits”: 2
[361] “ARS Modification – Added Number”: 05000 (Code of least expensive carrier for
an international call)
<Dialed number> <Modified number>
07 81 92 477 1450 050 00 81 92 477 1450
Example 3 (Long distance call via the first carrier):
[350] “ARS Selection”: Enable
[359] “1st Carrier Selection Code”: 000
<Dialed number> <Modified number>
000 93 425 9477 93 425 9477
Automatic Outside (CO) Line Access Number
An Automatic Line Access number (9 or 0) can be programmed. When an extension user
dials an Automatic Line Access number before a telephone number, an available outside
(CO) line from the assigned lines in program [419] is seized automatically. If “0” is selected
in program [121], the operator call will be “9” automatically. If “9” is selected in program
[121], the operator call will be “0” automatically.
Related Feature References
Operator Call, Outside Calling
Required System Programming
[121] Automatic Outside (CO) Line Access Number Selection
[419] Automatic Designated Outside (CO) Line Access

Table of Contents

Related product manuals