Panasonic KX-TA616 - Page 162

4-40 System Programming
[360]-[361] 4.2 System Programming
Determines how the dialed number applied to the ARS feature should be modified before
sending to the outside (CO) line for each route. The digits are deleted from the beginning of
the dialed number.
Default All routes – 0 (No deletion)
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
[360] ARS Modification – Removed Digits
removed digits
(0 ··· 9)
0
6
3
NEXT
END
(1 ··· 4)
route no.
SELECT
To continue
NEXT
PREV
or
To continue
STORE
Determines how the dialed number applied to the ARS feature should be modified before
sending to the outside (CO) line for each route. Numbers are added to the beginning of the
dialed number. Numbers can be carrier codes, etc.
Default All routes – Not stored.
• To correct a wrong entry, press the CLEAR button and enter the new one.
• Press to scroll the display to the right side.
• The assigned numbers will be added to the dialed number after deleting the digits
programmed in [360] “ARS Modification — Removed Digits”.
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
[361] ARS Modification – Added Number
added number
1
6
3
NEXT
END
(1 ··· 4)
route no.
SELECT
To continue
NEXT
PREV
or
To continue
STORE
20 digits max.
(0
··· 9, , #)
☞
☞