Panasonic KX-TA616 - Page 38

2-22 Installation
• Required System Programming
Section 4 System Programming
[700]–[702] Doorphone Ringing Assignment — Day/Night/Lunch
[703]–[705] Door Opener Assignment — Day/Night/Lunch
• Feature References
Section 3, Features
Door Opener, Doorphone Call
☞
2.16 Doorphone and Door Opener Connection
Connecting Door Openers
1. While pressing the button below a hole with a driver, insert the wire from the door opener
into the hole.
Door opener 1
Door opener 2
Door opener 3
Door opener 4
• We recommend using UL1015 wire or the equivalent for wiring.
• The wire should be between 0.4 mm and 1.2 mm {1/64 inch – 3/64 inch} in diameter
including the coating.
D = 0.4 mm – 1.2 mm {1/64 inch – 3/64 inch}
To the door openers
*
The illustrations on this page are a KX-TA308.
!
!
2. Wrap the strap around all of the cords. (☞ 2.20, Securing the Cords)