4-82 System Programming
4.2 System Programming
DISA Delayed Answer Time
504
Description Assigns the time from a call being received and answered using the
DISA feature.
Selection 0 sec / 3 sec / 6 sec / 12 sec (seconds)
Default 3 sec
Programming 1. Enter 504.
Display: Ans Delay Time
2. Press NEXT.
Display example: Time: 3sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • The outside (CO) lines which are assigned as “Enable” in program [900]
“Caller ID Assignment” are always set to 6 seconds even if “0 sec” or
“3 sec” is selected in this program.
Feature References Section 3, Features
Direct Inward System Access (DISA)
To Next Page
Loading...
