4.2 System Programming
DISA Busy Mode
System Programming 4-83
Description Selects the mode when destination extension of the call via DISA is
busy. There are two modes as follows.
Call Waiting: a call waiting tone is sent and then the call is held
until the called party responds.
Disconnect: the call is disconnected after the busy tone.
Selection Call Waiting / Disconnect
Default Disconnect
Programming 1. Enter 506.
Display: DISA Busy Mode
2. Press NEXT.
Display example: Disconnect
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Direct Inward System Access (DISA)
506
To Next Page
Loading...
