4.2 System Programming
DISA Intercept Mode
4-84 System Programming
Description Intercept Routing provides an automatic re-direction of DISA calls
which cannot or have not been answered within the programmed
time. This program is used to select whether the call is
disconnected or re-directed.
Intercept: the call is directed to the extensions assigned in
programs [408]–[410].
Disconnect: the call is disconnected.
Selection Disconnect / Intercept
Default Intercept
Programming 1. Enter 507.
Display: DISA IRNA Mode
2. Press NEXT.
Display example: Intercept
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature References Section 3, Features
Direct Inward System Access (DISA)
Intercept Routing
507
To Next Page
Loading...
