4.2 System Programming
DISA AA Wait Time
4-92 System Programming
Description Selects the time that the system waits for a second digit entry. If the
timer expires, the system will assume that the first digit is a DISA
built-in auto attendant number (AA number) if an AA number is
assigned in program [501] “DISA Built-in Auto Attendant”.
For example, if a number is not dialed within the programmed time
after dialing 1, the system will assume that “1” is an AA number.
Selection 1 sec / 2 sec / 3 sec / 4 sec / 5 sec (seconds)
Default 2 sec
Programming 1. Enter 517.
Display: DISA AA Time
2. Press NEXT.
Display example: Time: 2 sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • The AA wait timer will only work when “1” or “8” is dialed.
Feature Reference Section 3, Features
Direct Inward System Access (DISA)
517
To Next Page
Loading...
