4.2 System Programming
DISA Security Codes Digits Selection
4-94 System Programming
Description Selects the number of digits for the DISA security codes assigned
in program [512] “DISA Security Codes”.
Selection Number of digits: 4 – 10 digits
Default 4 digits
Programming 1. Enter 530.
Display: Security Digits
2. Press NEXT.
Display example: 4 digits
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • When the setting has been changed in this program, the DISA security
codes, if already assigned, will be canceled.
Feature Reference Section 3, Features
Direct Inward System Access (DISA)
530
To Next Page
Loading...
