6. Focus/Zoom
120
0 On the recording screen, you can rotate the focus ring to display the MF Assist
screen. If you have enlarged the picture by rotating the focus ring, the assist
screen will close approx. 10 seconds after the operation.
0 During MF, pressing [AF ON] will activate AF.
0 The recording distance reference mark is a mark
used to measure the focus distance.
Use this when taking pictures with MF or taking
close-up pictures.
0 Change the peaking sensitivity and the display method:
[] ¨ [ ] ¨ [Focus Peaking] (l 310)
0 Memorises the MF Assist position separately for vertical and horizontal
orientations:
[] ¨ [ ] ¨ [Focus Switching for Vert / Hor] (l 116)
0 You can change the display method of the magnified screen:
[] ¨ [ ] ¨ [MF Assist] (l 330)
0 Change the MF Guide display method:
[] ¨ [ ] ¨ [MF Guide] (l 330)
0 Disable focus ring operation:
[] ¨ [ ] ¨ [Focus Ring Lock] (l 330)
0 Set the movement of the MF Assist position to loop:
[] ¨ [ ] ¨ [Looped Focus Frame] (l 333)
0 The camera memorises the focus position when you turn it off:
[] ¨ [ ] ¨ [Lens Focus Resume] (l 348)
0 The amount of focus movement can be set:
[] ¨ [ ] ¨ [Focus Ring Control] (l 348)
To Next Page
Loading...
