318
Setting of Operation and RUN Menu
Backing Up Saved Image
Backups the images saved in the image memory during inspections to a SD memory card. Backupping cannot
be executed during operations (RUN).
1.
Select "TOOL" > "Save Image Memory".
The message is displayed if it is operating. To stop the operation and backup the images, stop it from
“OPERATION” menu.
2.
Select a place in the SD memory card to save them.
When the confirmation message appears, select “YES".
3.
After the saving is complete, the message appears. Select “OK” and press the CANCEL key.
Deleting Saved Image
Deletes the images saved in the image memory during inspections.
1.
Select "TOOL" > "Clear Image Memory".
When the dialog message appears, select “YES".
When the message disappears, deleting the images is complete.
Displaying Information of PV
1.
Select "TOOL” > “Information” from the menu bar.
The list of PV information is displayed.
To Next Page
