333
Saving Inspection Image in Image Memory
(Test Image Copy)
This function saves the last inspection images of the cameras in Test image memory. The default setting is to
save images. Change the setting only when you do not save them.
1
. Select "Operation" in “System Settings” setting window.
2.
Select “Save image in ‘Test’” or “Not save image in ‘Test’” for "When Switching to SETUP…".
Save image in ‘Test’ (default):
Saves the lastly inspected image of camera in Test image memory when switching to SETUP menu.
Not save image in ‘Test’: Saves no test image.
To Next Page
