Parker 890SD - Equipment Inspection; Packaging and Lifting Details

Getting Started
Page 2-4 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Equipment Inspection
♦ Check for signs of transit damage
♦ Check the product code on the rating label conforms to your requirement.
If the unit is not being installed immediately, store the unit in a well-ventilated place away from high
temperatures, humidity, dust, or metal particles.
Storage and Shipping Temperatures
Storage Temperature :
-25°C to +55°C
Shipping Temperature :
-25°C to +70°C
Refer to Appendix E: “Technical Specifications” to check the rating label/product code.
Refer to Chapter 11: “Routine Maintenance and Repair” for information on returning damaged goods.
Packaging and Lifting Details
Caution
The packaging is combustible. Igniting it may lead to the generation of lethal toxic fumes.
♦ Save the packaging in case of return. Improper packaging can result in transit damage.
♦ Use a safe and suitable lifting procedure when moving the unit. Never lift the unit by its terminal
connections.
♦ Prepare a clear, flat surface to receive the drive before attempting to move it. Do not damage any
terminal connections when putting the unit down.