Technical Specifications
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page E-35
8
9
10
11
B
C
D
1
2
3
4
5
6
7
E
Wire Sizes
North American wire sizes (AWG) are based on NEC/NFPA-70 for ampacities of thermoplastic-insulated
(75ºC) copper conductors assuming not more than three current-carrying conductors in raceway or cable,
based on ambient temperature of 30ºC.
The wire sizes allow for an ampacity of 125% of the rated input and output amperes for motor branch-
circuit conductors as specified in NEC/NFPA-70.
Power Output
Model Number Description Power Input
Bus Bar Connections Wire Connections
Brake
890CS/5/xxxxx
Terminal Capacity
AWG / mm
2
20 to 4 /
0.5 to 16
10mm by 3mm 20 to 4 / 0.5 to 16
20 to 6 /
0.5 to 10
890CS/5/xxxxB
Tightening Torque Nm
Sleeved
Lug
2.0 to 2.3
2.5 to 3.0
2.0
2.0
2.0 to 2.3
2.5 to 3.0
1.2
1.2
890CS/5/0027B
Wire size AWG / mm
2
8 / 10 10mm by 3mm 8 /10 10 / 6.0
890CS/5/0054B
Wire size AWG / mm
2
4 / 25 10mm by 3mm 4 / 25 10 / 6.0
Terminal Capacity
AWG / mm
2
4 to 4-0
25/ 95
10mm by 3mm
4 to 4-0
25/ 95
20 to 6 /
0.5 to 10
890CS/5/xxxxD
Tightening Torque Nm
15 to 20 2.0 15 to 20 1.2
890CS/5/0108D
Wire size AWG / mm
2
1-0 / 50 10mm by 3mm 2-0 / 70 3 / 25
890CS/5/0162D
Wire size AWG / mm
2
4-0 / 95 10mm by 3mm 4-0 / 95 1 / 50
To Next Page
Loading...
