Parker 890SD - 890 Common Bus;Standalone Drive

Keypad Menus
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page 9-3
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
890 Common Bus/Standalone Drive
The table below shows the parameters available using the 6511 Keypad. The full names as displayed by the
6901 Keypad and the DSE Configuration Tool are also provided. The list is shown in MMI order.
Note Additional parameters are available using the 6901 Keypad and the DSE Configuration Tool. Refer to
Appendix D for a full listing of all parameters.
Keypad Menus
6511 Keypad 6901 Keypad/DSE
OPER |__OPERATOR
OP 1 | |__SETPOINT
OP 2 | |__SPEED DEMAND
OP 3 | |__DRIVE FREQUENCY
OP 4 | |__MOTOR CURRENT A
OP 5 | |__TORQUE FEEDBACK
OP 6 | |__DC LINK VOLTS
DIAG |__DIAGNOSTICS
D 1 | |__SPEED DEMAND
D 2 | |__REMOTE SETPOINT
D 3 | |__COMMS SETPOINT
D 4 | |__LOCAL SETPOINT
D 5 | |__JOG SETPOINT
D 6 | |__TOTL SPD DMD RPM
D 7 | |__TOTAL SPD DMD %
D 8 | |__SPEED FBK RPM
D 9 | |__SPEED FBK %
D 11 | |__SPEED ERROR
D 12 | |__DRIVE FREQUENCY
D 13 | |__DIRECT INPUT