Parker 890SD - Function Blocks Alphabetically

Programming
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page D-5
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Function Blocks Alphabetically
The function block descriptions in this chapter are arranged alphabetically, however, they are also listed
below by Category. ADVANCED view level must be selected to see all the function blocks listed
Page Block Page Block Page Block
I/O Hardware Configuration
8 ANALOG INPUT 21 DIGITAL INPUT
10 ANALOG OUTPUT 22 DIGITAL OUTPUT
Sequencing/Referencing
11 AUTO RESTART 105 REFERENCE JOG 113 SEQUENCING LOGIC
61 LOCAL CONTROL 106 REFERENCE RAMP 117 SKIP FREQUENCIES
95 REFERENCE 109 REFERENCE STOP 152 ZERO SPEED
Motor Control
13 AUTOTUNE 63 MECH BRAKE 99 REFERNCE ENCODER
19 CURRENT LIMIT 65 MOTOR DATA 111 REGEN CONTROL
27 DYNAMIC BRAKING 70 MOVE TO MASTER 121 SLEW RATE LIMIT
30 ENCODER 77 PATTERN GEN 123 SLIP COMP
36 ENERGY METER 79 PHASE INCH 126 SPEED LOOP
37 FEEDBACKS 81 PHASE MOVE 134 SPEED LOOP 2
45 FLUXING 84 PHASE MOVE ABS 136 STABILISATION
50 FLYCATCHING 86 PHASE OFFSET 138 TORQUE LIMIT
55 INERTIA COMP 87 PHASE TUNING 147 VIRTUAL MASTER
57 INJ BRAKING 90 POSITION LOOP 151 VOLTAGE CONTROL
59 INVERSE TIME 93 POWER LOSS CNTRL 150 V MASTER SIMLATR