Parker 890SD - Legal Requirements for CE Marking

Certification
Page C-16 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Legal Requirements for CE Marking
IMPORTANT: Before installation, clearly understand who is responsible for conformance with the EMC directive.
Misappropriation of the CE mark is a criminal offence.
It is important that you have now defined who is responsible for conforming to the EMC directive, either:
Q Parker SSD Drives Responsibility
You intend to use the unit as relevant apparatus.
When the specified EMC filter is correctly fitted to the unit following EMC installation instructions, it
complies with the relevant standards indicated in the following tables. The fitting of the filter is mandatory
for the CE marking of this unit to apply.
The relevant declarations are to be found at the end of this chapter. The CE mark is displayed on the EC
Declaration of Conformity (EMC Directive) provided at the end of this chapter.
Q Customer Responsibility
You intend to use the unit as a component, therefore you have a choice:
1. To fit the specified filter following EMC installation instructions, which may help you gain EMC
compliance for the final machine/system.
2. Not to fit the specified filter, but use a combination of global or local filtering and screening methods,
natural migration through distance, or the use of distributed parasitic elements of the existing
installation.