Routine Maintenance and Repair
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page 11-3
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Disposal
This product contains materials which are consignable waste under the Special Waste Regulations 1996
which complies with the EC Hazardous Waste Directive - Directive 91/689/EEC.
We recommend you dispose of the appropriate materials in accordance with the valid environmental control
laws. The following table shows which materials can be recycled and which have to be disposed of in a
special way.
Material Recycle Disposal
metal yes no
plastics material yes no
printed circuit board no yes
The printed circuit board should be disposed of in one of two ways:
1. High temperature incineration (minimum temperature 1200°C) by an incinerator authorised under parts
A or B of the Environmental Protection Act
2. Disposal in an engineered land fill site that is licensed to take aluminium electrolytic capacitors. Do not
dispose of in a land fill site set aside for domestic waste.
Packaging
During transport our products are protected by suitable packaging. This is entirely environmentally
compatible and should be taken for central disposal as secondary raw material.
To Next Page
Loading...
