Parker Hauser COMPAX-M Series Interface Manual

3
2.12.9 PED_INI............................................... 75
2.12.10 PAD_INI............................................... 76
2.12.3 IN_SELECT ......................................... 77
2.12.4 OUT_SELECT ..................................... 77
2.12.5 OUT_ENABLE..................................... 78
3. DRIVECOM-PROFILE 22, from COMPAX
Software-Version 3.01...................................... 79
4. COMPAX Parameters for the Interbus-S........ 81
5. COMPAX Interbus-S Error messages ............ 82
6. Index .................................................................. 83
Compatibility
Using the setting P196="0" makes this software version V2.1
compatible with software version V1.15 ... V2.0.
With P196="0", the process data channel is automatically
assigned as follows:
Process input data channel PE with INPUT_WORD
Process output data channel PA with OUTPUT_WORD
Device allocation
This documentation applies for these devices:
♦
COMPAX 10XXSL with the Option F2
(available 04/2000)
♦
COMPAX 25XXS with the Option F2
♦
COMPAX 45XXS with the Option F2
♦
COMPAX 85XXS with the Option F2
♦
COMPAX P1XXM with the Option F2
♦
COMPAX 02XXM with the Option F2
♦
COMPAX 05XXM with the Option F2
♦
COMPAX 15XXM with the Option F2
♦
OMPAX 35XXM with the Option F2
XX: any characters
F2: Interbus-S - Option
Key to unit designation
e.g.: COMPAX 0260M:
COMPAX: name
02: performance class
60: Variant e.g. "00": Standard model
M: Type of device M: multi-axis unit
S: single-axis unit
HAUSER rating plate
The rating plate is found on the top of the unit and contains
the following information:
equipment
name
part numberserial number
option name
038106 0001 951-160101 Compax 0260M
E2

Parker Hauser COMPAX-M Series Specifications

General

Brand	Parker
Model	Hauser COMPAX-M Series
Category	Controller
Language	English