113
3
Taking Pictures
1
Press the b button.
The flash pops up and begins charging.
2
Press the four-way controller (4)
in A mode.
The [Flash Mode] screen appears.
3
Use the four-way controller (45) to select a flash
mode.
4
Press the 4 button.
The setting is saved and the camera returns to capture status.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in
the resulting picture. This phenomenon occurs when the light from the flash is
reflected in the subject’s eyes. It can be reduced by illuminating the area around
the subject or moving closer to the subject and zooming out to a wider angle.
Setting the flash mode to c, d or H is also an effective way of reducing red
eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.184).
Saving the Flash Mode setting 1p.144
b button
MENU
OK
OK
Cance
l
OK
Cancel
Flash
Mo
de
Au
to
Flash Mode
Auto
To Next Page
Loading...
