134
3
Taking Pictures
You can give the image sharp or soft outlines.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sharpness].
3
Use the four-way controller (45)
to change the sharpness level.
F Soft
G Normal
H Sharp
4
Press the 3 button.
The camera returns to capture status.
You can set either color brightness (Saturation) or the tone of
monochrome images (Tone Adjustment).
The items displayed change depending on the setting in [Image Tone] of
the [A Rec. Mode] menu.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
If the Blink Detection function worked when shooting, the message
[Closed eyes have been detected] appears for 3 seconds during Instant
Review.
Setting the Image Sharpness (Sharpness)
Setting the Color Saturation/Tone (Saturation/
Tone Adjustment)
Image Tone Setting Displayed Item
Bright/Natural Saturation
Monochrome Tone Adjustment
Rec. Mode
Contrast
Off
MENU
Exit
4/4
Saturation
Date Imprint
Sharpness
To Next Page
Loading...
