EasyManua.ls Logo

Pentax X90 - Using a Wireless LAN

Pentax X90
272 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
234
8
Viewing Images on a Computer
Using a Wireless LAN
You can transfer images via wireless LAN by using an SD Memory Card
with a built-in wireless LAN (Eye-Fi card).
Precautions When Using the Eye-Fi Card
Eye-Fi cards that can be used with this camera are Eye-Fi Share and Eye-Fi
Share Video.
If an outdated version of the Eye-Fi card is inserted into the camera, an error
message will appear.
When using an Eye-Fi card for the first time, install the Eye-Fi Manager
software from the card to your computer before formatting the card.
Use of an access point and an Internet connection are required for
transferring images via wireless LAN. For details, refer to the Eye-Fi website.
(http://www.eye.fi)
Use Eye-Fi cards which have been updated to the newest firmware.
Set [Eye-Fi] to P (Off), or do not use an Eye-Fi card in a location where the
use of wireless LAN devices is restricted or prohibited, such as airplanes.
Eye-Fi cards can be used only in the country in which the card was
purchased. Please observe all local laws governing Eye-Fi card usage.
This camera features a function to enable/disable the communication function
of the Eye-Fi card, however, we do not guarantee the operability of all Eye-Fi
card functions.
Refer to the Eye-Fi card manual for details on how to use the card.
Please contact the Eye-Fi card manufacturer regarding any malfunctions or
problems concerning Eye-Fi cards.

Table of Contents

Related product manuals