35
1
Getting Started
Use of the optional AC adapter kit (K-AC106) is recommended if you
intend to use the camera for a long time or connect it to a computer.
1
Make sure that the camera is turned off and open the
battery/card cover.
2
Remove the battery.
Refer to p.32 - p.33 on how to open/close the battery/card cover and
remove the battery.
3
Insert the DC coupler while holding down the battery
lock lever
(1).
Confirm the DC coupler is locked in place.
4
Extract the DC coupler cord.
Pull open the connection cable cover (2) which is next to the battery/
card cover, and pull out the cord from the DC coupler.
5
Close the battery/card cover.
Using the AC Adapter
AC plug cord
DC terminal
3
1
AC adapter
6
4
8
7
DC coupler
To Next Page
Loading...
