214
7
Settings
Set whether to display the guides in Capture Mode Palette and Playback
Mode Palette or when setting the capture mode.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Guide
Display].
3
Use the four-way controller (
45
) to select
O
or
P
.
O The mode guides are displayed. (Default setting)
P The mode guides are not displayed.
4
Press the 3 button.
The camera returns to A mode or Q mode.
You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
• One of the three pre-installed images
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select R (Start-up
Screen).
Setting the Guide Display
Changing the Start-up Screen
2/2
Start-up Screen
OK
OK
MENU
Cancel
For setting a captured
image as the Start-up
Screen
To Next Page
Loading...
