Pentax X90 - Brightness Compensation (D-Range)

128
3
Taking Pictures
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
You can set the area of the screen where the brightness is metered to
determine the exposure.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [AE
Metering].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select a metering method.
When [Highlight Correction] in [D-Range Setting] is set to O (On), select
from 160-200, 160-400, 160-800, and 160-1600.
Setting the AE Metering
L
Multi-segment
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
M
Center-weighted
The camera takes a reading of the overall brightness of the
image with the center of the image having more influence on
the exposure.
N
Spot
The camera determines the exposure by metering the
brightness only at the center of the image.
Rec. Mode
MENU
Cancel
2/4
AE Metering
AF Setting
Flash Exp. Comp.
D-Range Setting
Shake Reduction
Movie
OK
OK