Pentax X90 - Setting the Movie SR (Movie Shake Reduction) Function

143
3
Taking Pictures
6 Use the four-way controller (23)
to change the number of recorded
pixels and frame rate.
7 Press the 4 button.
The setting is saved.
8 Press the 3 button twice.
The camera returns to capture status.
In C mode, you can compensate camera shake while you are recording
a movie with the Movie SR (Movie Shake Reduction) function.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Movie].
3 Press the four-way controller (5).
The [Movie] screen appears.
4 Use the four-way controller (23) to select [Movie SR].
5 Use the four-way controller (45)
to select O or P.
O Automatically corrects camera shake.
(Default setting)
P Does not correct camera shake.
The setting is saved.
6 Press the 3 button twice.
The camera returns to capture status.
Setting the Movie SR (Movie Shake Reduction)
Function
Rec. Time
MENU
Cancel
OK
OK
15:02:26
Recorded Pixels
Movie SR
Movie
MENU
Recorded Pixels
Movie SR