Pentax X90 - Changing the Date and Time

202
7
Settings
4 Use the four-way controller (23) to select [Start-up
Sound].
5 Press the four-way controller (5).
A pull-down menu appears.
6 Use the four-way controller (23) to select the sound
type.
Choose from [1], [2], [3] or [Off].
7 Press the 4 button.
8 Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in Steps 4 to 7.
9 Press the 3 button twice.
The camera returns to A mode or Q mode.
You can change the initial date and time settings (p.47). You can also
set the format in which the date appears on the camera.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Date
Adjustment].
3 Press the four-way controller (5).
The [Date Adjustment] screen appears.
To Change the Sound Type
Changing the Date and Time