Pentax X90 - Setting the Green Button

137
3
Taking Pictures
You can assign one of the following functions to the 9 (Green) button:
[9 Green Mode] (p.72) or [Fn Setting]. You can activate the assigned
function by just pressing the 9 (Green) button.
Default settings of Fn Setting
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23)
to select [Green Button].
3 Press the four-way controller (5).
The [Green Button] screen appears.
Setting the Green Button
Green Mode Press the 9 button to shoot in 9 (Green) mode. (Default setting)
Fn Setting
Press the 9 button to use the functions assigned to the four-way
controller (2345). By assigning frequently used functions to the
four-way controller, you can easily change the settings during
shooting.
The functions that can be set differ depending on the capture mode
used before the 3 button is pressed.
• When you press the 3 button in still picture capture mode:
Still picture capture functions are assigned.
• When you press the 3 button in movie recording mode:
Movie recording functions are assigned.
Four-way Controller Still Picture Mode Movie Mode
2 Recorded Pixels Movie SR
3 Quality Level Recorded Pixels
4 White Balance White Balance
5 Sensitivity Focusing Area
Rec. Mode
MENU
Cancel
3/4
Memory
Green Button
Blink Detection
Digital Zoom
Instant Review
Interval Shoot