Pentax X90 - Auto Power Off Timer Setting

210
7
Settings
You can adjust the brightness of the display.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Brightness
Level].
3 Use the four-way controller (45)
to adjust the brightness.
F Dark
G Normal
H Bright
4 Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Power
Saving].
Adjusting the Brightness of the Display
Using the Power Saving Function
2/4
NTSC
MSC
Eye-Fi
MENU
Setting
Video Out
USB Connection
HDMI Out
Auto
Brightness Level
Power Saving
5 sec.
Exit