211
7
Settings
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
enters power saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] (default setting) or [Off].
5
Press the 4 button.
The setting is saved.
• Power Saving does not function in the following situations:
- while taking pictures in continuous shooting mode
- in the playback mode
- during movie recording/playback
- while the camera is connected to a computer
- while a menu is being displayed
- while the camera is connected to an AV device
- when switching to the viewfinder using the G button
• When no operation is performed after the camera is turned on, the
Power Saving function is activated only after 15 seconds elapse even
if [5sec.] is set.
2/4
2
Off
5
30
1
15
min.
sec.
sec.
min.
sec.
MENU OK
OK
Setting
Video Out
USB Connection
HDMI Out
Brightness Level
Power Saving
Cancel
Eye-Fi
To Next Page
Loading...
