Pentax X90 - Default Settings

247
9
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
turned off.
No : The setting returns to the default setting when the camera is
turned off.
* : The setting depends on the [Memory] setting (p.144).
—:N/A
Reset Setting
Yes : The setting returns to the default setting with the reset function
(p.217).
No : The setting is saved even after reset.
—:N/A
[A Rec. Mode] Menu Items
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Image Tone Bright Yes Yes p.120
Recorded Pixels E (4000×3000) Yes Yes p.121
Quality Level D (Better) Yes Yes p.123
White Balance F (Auto) * Yes p.124
Sensitivity AUTO * Yes p.126
ISO Corction in AUTO 80-800 * Yes p.127
AF
Setting
Focusing Area J (Multiple) Yes Yes p.117
Auto Macro O (On) Yes Yes p.118
Focus Assist O (On) Yes Yes p.119
AE Metering
L (Multi-segment
metering)
* Yes p.128
Flash Exp. Comp. ±0.0 Yes Yes p.129
Movie
Recorded Pixels M(1280×720/30 fps) Yes Yes p.142
Movie SR O (On) Yes Yes p.143