Pentax X90 - Recordable Image Capacity

38
1
Getting Started
1 Open the battery/card cover.
Slide the battery/card cover lock lever in the direction of the arrow to
open the cover (1).
2 Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing toward the front of the
camera (the side with the lens).
Push the card in all the way. Data may not be recorded correctly if the
card is not inserted all the way.
3 Close the battery/card cover.
After closing the battery/card cover, slide the battery/card cover lock
lever in the opposite direction of 1.
1 Open the battery/card cover.
2 Push the card into the SD Memory Card socket to eject
it.
Pull the card out.
To Remove the SD Memory Card
SD Memory CardBattery/card cover lock lever
Battery/card cover