Pentax X90 - Camera Shooting Mode Features; Instant Review and Blink Detection; Face Detection Functionality

68
3
Taking Pictures
5 Press the shutter release button
halfway.
The selected shooting mode is displayed on
the top left of the screen.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
To use the flash, press the b button to pop up the flash. (p.114)
6 Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The captured image appears on the display (Instant Review: p.70) for
one second and is saved to the SD Memory Card or the built-in
memory.
Standard Night Scene Night Scene Portrait
Landscape Flower Portrait
Sport
The following restrictions apply in I mode:
- You cannot turn the Face Detection function off.
- The focusing area setting is fixed at J (Multiple).
- The (Flower) mode cannot be selected when using Digital Zoom
or Intelligent Zoom.
- If the (Night Scene) mode is selected when the flash mode is ,
(Auto), the flash mode automatically changes to a (Flash Off).
- If the (Night Scene) mode is selected when the flash mode is set
to a mode other than , (Auto), the flash mode set before the
shooting mode was selected is used. However, when discharging
the flash, the flash mode is set to G (Slow-speed Sync).
- When the drive mode is set to A (Burst Shooting(L)),
B Burst
Shooting(M)), or
C (Burst Shooting(H)), pictures are taken
continuously in the shooting mode first selected.
- The camera automatically focuses on the subject when [Auto Macro]
is set to O (On), and the focus mode is set to = (Standard) or q
(Macro).
F 3 . 5
1 / 2 5 0
F3.5
1/250
14:25
1 4 : 2 5
14:25
38
3 8
38
02/02/2010
0 2 / 0 2 /2010
02/02/2010