73
3
Taking Pictures
1
Press the 9 button in A mode.
The camera switches to 9 mode.
Press the 9 button again to return to the
status before 9 mode was selected.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears. (p.70)
To use the flash, press the b button to pop up the flash. (p.114)
2
Press the shutter release button halfway.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• The 9 mode is available only when it is assigned to the Green button
in [Green Button] of the [A Rec. Mode] menu. By default, the 9 mode
is assigned to the 9 button.
•In 9 mode, you cannot change the information on the display by
pressing the u button.
• If you press the 3 button in 9 mode, the [W Setting] menu
appears. The [A Rec. Mode] menu cannot be displayed.
9 button
Shutter release
button
38
38
To Next Page
Loading...
