Pentax X90 - Page 97

95
3
Taking Pictures
1 Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2 Use the four-way controller (45)
to select k and press the 4
button.
The current settings for interval shooting
appear for approximately 1 minute. To take
pictures with the current settings, proceed
to Step 7.
3 Press the 4 button.
The [Interval Shoot] screen appears.
4 Use the four-way controller (23)
to select [Interval], [Number of
Shots] or [Start Delay].
5 Press the four-way controller (5), then use the four-
way controller (23) to change the settings.
To change another setting, press the four-way controller (5).
6 When finished, press the 3 button.
The screen shown in Step 3 reappears.
The camera returns to capture status after approximately one minute.
7 Press the shutter release button halfway.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
LL MM HH
Drive Mode
Drive Mode
Interval Shoot
Interval Shoot
MENU
Cancel
Cancel
OK
OK
OK
0
h r .
hr. 0
m i n .
min.
30
30 m i n .
min. 0
20
20
38
3 8
38
I n t e r v a l
Interval
N u m b e r o f S h o t s
Number of Shots
S t a r t D e l a y
Start Delay
00
30 0
s e c .
sec.
20
OK
C h a n g e
Change
Interval Shoot
MENU
Interval 0 10min. sec.
Number of Shots 2
Start Delay hr. min.0
0