97
3
Taking Pictures
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45)
to select a.
The camera is ready to take pictures with
Auto Bracket.
3
Use the four-way controller (23) to select the
bracketing range and press the 4 button.
You can set the adjustment from ±0.3EV to ±2.0EV.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the subject is in
focus.
5
Press the shutter release button fully.
Press the shutter release button once to automatically adjust the
exposure and take the three pictures at different exposures.
Auto Bracket is not available in 9 (Green), S (Fireworks), X (Digital
Wide), F (Digital Panorama) or C (Movie) mode.
When [Instant Review] is set to O (On) (p.133), the third picture taken is
shown in Instant Review after shooting (p.70).
OK
OK
0.3
Drive Mode
Auto Bracket
MENU
Cancel
± 0.3
LL MM HH
To Next Page
Loading...
