PG DRIVES TECHNOLOGY
85
CHAPTER 4 - LIGHTING
SK77898/2
Refer to the following illustration for more detail.
HRS part numbers: Housing DF7-3S-3.96C
Crimps DF7-1618SCF
PG Drives Technology: Connector Boot P76720
As an alternative a complete kit can be purchased from PG Drives Technology.
PG Drives Technology: 3 Way Connector Kit: D50301
PGDT recommends the use of 0.75 mm
2
/ 20 AWG Tri-Rated
Equipment wire or
equivalent.
Secure all cables to the wheelchair frame over as much of
their length as is practical.
PGDT accepts no liability for losses of any kind arising from
damage to or failure of the wheelchair lighting system,
including any associated wiring. It is the responsibility of the
wheelchair manufacturer to ensure that the lighting system
wiring complies with all relevant standards.
To Next Page
Loading...