To Next Page

To Previous Page

One-push Shift Function

When the dierence between the set value and metered value is displayed on

the viewnder LCD in the Manual “M” mode, press the AEL button for approx. 1

second and the camera will automatically adjust the shutter speed to achieve

the correct exposure based on the set aperture value.

While the dierence[B] between the set value[A] and the metered value is

displayed on the viewnder LCD, press the AEL button[C] for approximately

one second. The camera changes the shutter speed to an appropriate level.

Auto Mode Mechanism

A leaf shutter’s working range is from 1/800 sec. to 1 second. To achieve

other speeds (1/4000-1/800 sec., 1-60sec.., bulb) use the focal plane shutter.

Synchro Mode (X)

Select this mode when a ash is used. Choose “X” and the shutter speed will

be xed at 1/125 second for synchronization.

NOTICE:

The aperture level can be selected for the

parameter to shift.

NOTICE:

Photography using the leaf shutter or focal

plane shutter can be selected in customs

settings

NOTICE:

The selected aperture value can be locked.

When 1/800 sec. shutter speeds can not be

achieved even though the leaf shutter lens

is attached, try another exposure mode.

A B

PhaseOne IQ Series User Manual

Questions and Answers: