54
Tethered Operations Continued
The display on an IQ2 Series back can be either be turned o while shooting
tethered or set to display the images while they are shot, just as if shooting
untethered. It is also possible to enlarge a section of an image on the IQ2
screen to help check focus of the current and upcoming captures.
An IQ2 back will default to its untethered mode when the FireWire 800 or
USB3 cable is removed in its Auto Storage setting. Captured image les will
be stored on a CompactFlash card, and the unit’s battery will provide power.
(The IQ2 back can be forced to shoot to either CompactFlash or via a FireWire
800 cable to a computer. Find out more on the Storage Mode on page 85).
Online Support
For more information on shooting tethered with Capture One please consult
the online user guide available in the Capture One Help menu or go direct to
http://help.phaseone.com/en/CO7/Capture/Tethered-Shooting.aspx
To Next Page
Loading...
Need help?
General
